The
AZZA
P4X2-A MAINBOARD SERIES
Page 18
10 pins
PIN 1
Normal ATX Power Supply
2x2 12V ATX Power Supply.
1x6 12V ATX Power Supply
2.4.6. WOL (Wake On LAN) Connector and WOM (Wake On Modem) Con-
nector
Connector:
CN 16 (WOL)/CN 24(WOM)
Type:
3 pin
The WOL connector must be connected to a LAN card that has Wake-On-LAN (WOL) output.
This connector powers up the system when a wakeup packet or signal is received through
the LAN card.
The WOM connector must be connected to a Modem that has Wake-On-Modem (WOM) out-
put. This connector powers up the system when a wakeup packet or signal is received from
the Modem.
In order to use the WOL LAN card or the modem to trigger the power on the PC system,
the switching power supply must have the ability to provide a driving current of at least 720
mA and be connected to a “5V standby” voltage.
WOL/WOM
5V_SB
Ground
1 5V_SB
2 Ground
3 WOL/WOM
Top View of a WOL/WOM Connec-
tor
Front View of a WOL/WOM Con-
nector
Hard
ware
In
sta
llat
ion
Hardware Installation
