P4X MAINBOARD SERIES
Page 12
Installation Checklist (Continued)
PW
S5L
HL
RS
Power On/Off and Suspend Switch Connector.
Standby LED Connector
HDD LED Connector
Reset Button Connector
PWR-LED
SPK
Power LED
Speaker Connector
JP1
JP2
JP4/JP5
JP13
Keyboard Power
USB 1 and 2 Power
CPU FSB Selection
Clear CMOS
Speaker and Power LED Connector
Jumpers
System Panel Buttons and LED Connectors
•
You need to complete the following installation steps before you
can use your PC.
•
Check and Set the Mainboard Settings.
•
Install the Central Processing Unit (CPU).
•
Install the Memory Modules.
•
Install the Expansion Cards.
•
Connect the Ribbon Cables, Panel Wires and the Power Supply.
•
Setup the system BIOS
B
efore you start installing your mainboard we strongly recommend that you
use a grounded anti-static mat. We further recommend that you attach an anti-
static wristband, which is grounded at the same location as the mat, to your
wrist.
A Diagram of the Expansion Slots, Jumpers and
Connectors can be seen on the following page
2.2. Installation Steps
Only use an ATX 12V Power Supply.
Hardware Installation
