※
Before the fan starts,please make sure the PWM connector and SATA connector each are connected.
Fan Installation
CONNECTOR
CONNECTION
①
②
ARGB LED 5V (3pin) female connector
ARGB LED 5V (3pin) male connector
③
④
⑤
⑥
Fan Connector
Fan Connector PWM (4pin)
SATA
Power Supply
※
Press the LED button to cycle through different RGB lighting modes, all ARGB devices are controlled by the
LED button. (make sure the other 3pin ARGB devices are connected with
⑥
)
※
Ensure
②
insert the motherboard, hold the LED button for 3 seconds to switch the RGB control function between
motherboard RGB software and LED button.
LED
Button
⑦
The 5V/3pin ARGB socket of the motherboard
The master Fan connect to the sub-fan
CHA_FANx socket of the motherboard
Other 5V/3pin ARGB devices
Logo ARGB LED connector
The last sub-fan female connector
3
6
7
7
Front panel logo
1
2
3
4
5
④
⑤
Reset (LED)
S/W (2pin)
Summary of Contents for LEGIONAIRE CSAZ-470
