The
AZZA
KT33-BV Mainboard
Page 39
Video Off Option
When enabled, this feature allows the VGA adapter to operate in a power
saving mode.
Modem Use IRQ
This determines the IRQ which the MODEM can use for Power Saving pur-
poses. This mainboard has the ACPI feature designed on the board and it will
“wake-up” automatically when it detects an incoming modem Ring-in signal.
Before you can use the Ring-in signal to wakeup your PC system, you have to
install the “External” modem to your PC system and tell the PC system which
serial port connects to the modem by selecting the IRQ in this field. (Officially
COM1 uses IRQ4)
Video Off Method
This determines the manner in which the monitor goes blank.
Always On
Monitor will remain on during power saving modes.
Suspend --> Off
Monitor blanked when the systems enters the Suspend mode.
MODEM Use IRQ
This determines the IRQ the modem can use.
V/H SYNC+Blank
This selection will cause the system to turn off the vertical and hori-
zontal synchronization ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS Support
Select this option if your monitor supports the Display Power Man-
agement Signaling (DPMS) standard of the Video Electronics Stan-
dards to select video power management values.
MODEM Use IRQ
This determines the IRQ which the MODEM can use for power saving purposes.
This mainboard has the ACPI feature designed on the board and it will
“wakeup” automatically when it detects an incoming modem Ring-in signal.
Before you can use the Ring-in signal to wakeup your PC system, you have to
install the “External” modem to your PC system and tell the PC system which
serial port connects to the modem by selecting the IRQ in this field, (officially,
COM 1 uses IRQ4, and COM 2 uses IRQ3)
Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces the system to enter
the Soft-Off state when the system has “hung”.
PWRON After PWR-Fail
See the following table for all the options.
Managing The PC BIOS
