AZZA 845D-AV Manual Download Page 16

Page: 16 / 44

The 845D-AV MAINBOARD

Ver 3.x

Page 16

2.5.4. ATX Power Supply Connectors

(CN15-D optional)

Connector: CN 15-A/ CN15-B/ CN15-D

Type: 2x10/2x2/1x4

The 845D-AV mainboard comes with

three onboard power supply connectors

labeled CN15-A, CN15-B and CN15-D.

CN15-A and CN15-B are regular ATX

power supply connectors. The auxiliary

power supply connector (CN15-D) is for a

+12V and +5V power supply. These in-

creased power supplies are necessary to

provide extra power for the slot. The ATX

12V power supplies are all downward

compatible with standard ATX power sup-

plies.

Hardware Installation

Pin 1 Pin 11

+3.3VDC

COM

+5VDC

COM

+5VDC

COM

PWR_OK

+5VSB

+12VDC

+3.3VDC

-12VDC

COM

PS_ON#

COM

-5VDC

+5VDC

ATX Power Supply Connector

Pin 1 Pin 3

COM

+12VDC

ATX12V Power Supply Connector

Auxiliary Power Supply Connector

Pin 4

Pin 3

Pin 2

Pin 1

+5VDC

COM

+12VDC

2.5.5. WOL (Wake On LAN) Connector

Connector: CN 16 (WOL)

Type: 3 pin

The 845D-AV mainboard has a WOL (Wake-On-LAN) connector. This connec-

tor must be connected to a LAN card that has Wake-On-LAN (WOL) output.

This connector powers up the system when a wakeup packet or signal is re-

ceived through the LAN card.

In order to use the WOL LAN card to trigger the power on the PC system, the

switching power supply must have the ability to provide a driving current of at

least 720 mA and be connected to a “5V standby” voltage.

WOL

5V_SB

Ground

1 5V_SB

2 Ground
3 WOL

Top View of a WOL Connector

Front View of a WOL Connector

Summary of Contents for 845D-AV













































Search results

Summary of Contents for 845D-AV

Reviews:

Related manuals for 845D-AV

Brands by name

Popular brands

AZZA 845D-AV, Manual

Search results

Summary of Contents for 845D-AV

Reviews:

Related manuals for 845D-AV

Brands by name

Popular brands