VIA 82C693
MAINBOARD
AWARD BIOS SETUP
4-15
LPT & COM :
(Default setting: LPT/COM)
When set to
On
(default), any event occurring at a COM(serial)/LPT (printer) port will
awaken a system which has been powered down.
HDD & FDD :
(Default setting: ON)
When set to
On
(default), any event occurring at a hard or floppy drive port will
awaken a system which has been powered down.
DMA/master :
(Default setting: ON)
When set to
On
(default), any event occurring at a hard or floppy drive port will
awaken a system which has been powered down.
Modem or LAN Resume :
(Default setting: Disabled)
When set to
Enabled
, any event occurring to the Modem Ring will awaken a system
which has been powered down.
The Choice: Enabled, Disabled.
RTC Alarm Resume :
(Default setting: Disabled)
When
Enabled,
your can set the date and time at which the RTC (real-time clock) alarm
awakens the system from Suspend mode
The choice: Enabled, Disabled.
Primary INTR :
(Default setting: ON)
When set to
On
(default), any event occurring at will awaken a system which is in
Suspend mode.
The following is a list of IRQ’s,
I
nterrupt
R
e
Q
uests, which can be exempted much as
the COM ports and LPT ports above can. When an I/O device wants to gain the
attention of the operating system, it signals this by causing an IRQ to occur. When the
operating system is ready to respond to the request, it interrupts itself and performs the
service.
When set On, activity will neither prevent the system from going into a power
management mode nor awaken it.
IRQ3(COM 2) IRQ4(COM 1) IRQ5(LPT 2)
IRQ6(Floppy Disk) IRQ7(LPT 1) IRQ8(RTC Alarm)
IRQ9(IRQ2 Redir) IRQ10(Reserved) IRQ11(Reserved)
