VIA 82C693
MAINBOARD
AWARD BIOS SETUP
4-5
When you find the message on your screen, please run the anti-virus program to see
whether your system is infected by a virus or not.
Enabled :
A warning message will be displayed on the screen when
something
attempts to access the boot sector or hard disk partition table.
Disabled
: No warning message will appear on the screen when
anything
attempts to
access the boot sector or hard disk partition table.
CPU Internal Cache / External Cache :
( default setting: Enabled )
These fields allow you to turn on or turn off the Level 1 and Level 2 cache that built-in
Pentium™ II or Celeron™ processors.
CPU L2 Cache ECC Checking:
( default setting: Enabled )
This option will enable or disable the ECC checking on the CPU L2 cache. The ECC
checking will ensure the accuracy of the data stored on the L2 cache.
Quick Power on Self Test:
( default setting: Enabled )
The Quick Power On Self Test will skip some test and speed up the boot process. If you
find the system is working normally, you can always enable this feature so that you
don’t have to wait too long on the POST.
Boot Sequence :
( default setting: A,C,SCSI ) )
This field allows you to use some other device to load the operating system. The
options available are “A,C,SCSI”, “C,A,SCSI”, “C,CDROM,A”, “CDROM,C,A”,
“D,A,SCSI”, “E,A,SCSI”, “F,A,SCSI”, “SCSI,A,C”, “SCSI,C,A”, “C only” and
“LS/ZIP,C”.
.
When select to load the OS from “CDROM,C,A” or “LS/ZIP,C”, you must select the
“HARD DISK TYPE and MODE” properly, the “Auto” selection is recommended so
that you can use CDROM or LS/ZIP device to load the OS into your system. (You can
find these items in the “STANDARD CMOS SETUP” )
Swap Floppy Drive :
( default setting: Disabled )
When enable this option, the device name of the floppy drives will be swapped, For
example, drive A will be treated as drive B, and drive B as Drive A.
Boot Up Floppy Seek :
( default setting: Enabled )
