PT-6IFA
SYSTEM BOARD
AWARD BIOS SETUP
12
ESC : Quit
: Select Item
F1 : Help
PU/PD/+/- : Modify
F5 : Old Values
(Shift)F2 : Color
F7 : Load Setup Defaults
Fig. 5-8 INTEGRATED PERIPHERALS setup screen.
WARNING :
The INTEGRATED PERIPHERALS in this screen are provided so that
technical professionals can modify the Chipset to suit their requirement.
If you are not a technical engineer, do not use this program !
IDE HDD Block Mode :
This feature enhances hard disk performance, making multi-sector transfers instead of
one sector per transfer. Most IDE drives, except the very early designs can use this
feature. Default is "Enabled".
IR Duplex Mode :
This field determines the IR port transmission mode is Half-Duplex or Full-Duplex.
Use IR Pins :
This field determines the IR module is connected to CN12 (IR-RX2TX2) or CN11 (IR-
RX TX).
Parallel Port Mode :
This field determines the onboard parallel port (CN 6) function mode. Supports either
Normal, EPP, ECP or ECP+EPP.
A.
LOAD SETUP DEFAULTS
This option loads the SETUP default values from BIOS default table. By pressing
"Enter" key, while "LOAD SETUP DEFAULTS" is highlighted, then presses "Y" and
"Enter" key. the SETUP default values will be loaded. The SETUP default settings are
the best-case values that should optimize system performance and increase system
stability. If CMOS RAM is corrupted, the SETUP DEFAULTS settings are loaded
automatically.
A.
SUPERVISOR PASSWORD / USER PASSWORD
