Settings
22
Advanced settings / Base settings
Using a handset to put the base in
registration mode
Go to
SETTINGS
/
ADVANCED SET.
/
SET BASE
/
REGISTR. MODE
.
Press
Yes
to enter the registration mode. The
indicator light on your base starts to quickly blink blue.
Your base will remain in registration mode for about 1
minute.
Resetting the base
When you reset the base, all the base parameters are
reset to their initial values (factory settings).
Go to
SETTINGS
/
ADVANCED SET.
/
SET BASE
/
RESET BASE
.
Press
Yes
.
Enter the base code. Press
Valid.
.
The
RE-INIT. IN PROCESS
message is displayed on
the screen.
Deregistering a handset
Go to
SETTINGS
/
ADVANCED SET.
/
SET BASE
/
DELETE HANDSET
.
Select the handset you wish to deregister.
Press
Valid.
.
A screen prompts you to confirm the deregistration.
Press
Yes
to deregister the handset.
Renaming the base
Go to
SETTINGS
/
ADVANCED SET.
/
SET BASE
/
RENAME BASE
.
Select the base for which you want to modify the name.
Press
Valid.
.
Enter the new name. Press
Valid.
.
Advanced settings / Line settings
Modifying the network type
Your DECT telephone can be installed on a public or
private network (when using a PABX).
This function enables you to configure your telephone
according to the type of network.
Go to
SETTINGS
/
ADVANCED SET.
/
SET LINE
/
NETWORK TYPE
.
A screen presents the current status.
•
To keep the status, press
Valid.
.
•
To change the status, press
Edit
.
The status is modified on the screen, press
Valid.
.
Modifying the dialling mode
Go to
SETTINGS
/
ADVANCED SET.
/
SET LINE
/
DIAL
.
A screen displays the current status.
•
To keep the status, press
Valid.
.
•
To modify the status, press
Edit
.
The status is modified on the screen, press
Valid.
.
Modifying the flash duration (R key)
If you connect your telephone to a private automatic
branch exchange (PABX) or use it in a foreign country,
you may need to modify the flash duration in order to
use your telephone correctly when using the following
functions: outgoing 2nd call, incoming 2nd call, 3 way
calling.
Contact your service provider to obtain the correct flash
duration and then modify it by doing the following.
Go to
SETTINGS
/
ADVANCED SET.
/
SET LINE
/
FLASHING
.
An information screen presents the current flash
duration.
•
To keep the duration, press
Confirm
.
•
To modify the duration, press
Edit
.
Select the new duration using
or
.
Press
Valid.
.
When resetting the base, code is reset to
0000.
The line settings should not providing that
the telephone is connected to the Telkom
network. If the telephone is a PABX phone
then the line settings may require changing.
Contact your PABX administrator if
necessary.
The default dialling mode is tone which is
the method used by all exchanges in the
Republic of South Africa and should not be
changed.
LU Azurite D32T- EN.book Page 22 Mercredi, 9. décembre 2009 2:37 14