AzureWave AW-AM691NF, User Manual, Page: 32 / 45

- 32 -
./wl cur_etheraddr 00:11:22:33:44:55
./wl pkteng_start 00:11:22:33:44:55 rx
This will enter MCS7 HT40, Channel 38 receive mode.
11a HT40 Rx MIMO mode:
./wl ver
./wl mpc 0
./wl country ALL
./wl up
./wl phy_forcecal 1
./wl interference 0
./wl phy_watchdog 0
./wl scansuppress 1
./wl phy_oclscdenable 0
./wl isup
./wl down
./wl mimo_preamble 0
./wl mimo_bw_cap 1
./wl mimo_txbw 4
./wl band a
./wl chanspec -c 38 -b 5 -w 40 -s 1
Å
set Tx channel
./wl up
./wl chanspec
./wl sgi_tx 0
./wl nrate -m 15 -s 3
Å
set Tx data rate
./wl txant 3
Å
set Tx path 0: port 0, 1:port 1, 3: dual port
./wl antdiv 3
Å
set Tx path 0: port 0, 1:port 1, 3: dual port
./wl cur_etheraddr 00:11:22:33:44:55
./wl pkteng_start 00:11:22:33:44:55 rx
The default MAC address is 001122334455. Packets sent from Signal Generator must have the same MAC
address as the DUT’s MAC address (Runtime mac address can be overrode by using wl cur_etheraddr
xx:xx:xx:xx:xx:xx .
4
. Use “wl counters” and find the received frame numbers in “pktengrxducast”.
US