Aztech WIPC410 ENHANCED HD User Manual Download Page 2

 

 

 

User Manual 

 

© Copyright 2015 All rights reserved. Ver1.1 

No part of this document may be reproduced, republished, or retransmitted in any 
form or by any means whatsoever, whether electronically or mechanically, including, 
but  not  limited  to,  by  way  of  photocopying,  recording,  information  recording,  or 
through retrieval systems without the express written permission. We reserve the right 
to  revise  this  document  at  any  time  without  the  obligation  to  notify  any  person 
and/or  entity.  All  other  company  or  product  names  mentioned  are  used  for 
identification purposes only and may be trademarks of their respective owners. 

LIMITATION OF LIABILITY AND DAMAGES 

THE  PRODUCT  AND  THE  SOFTWARES  WITHIN  ARE  PROVIDED  "AS  IS,"  BASIS.    THE 
MANUFACTURER  AND  MANUFACTURER’S  RESELLERS  (COLLECTIVELY  REFERRED  TO  AS 
“THE  SELLERS”)  DISCLAIM  ALL  WARRANTIES,  EXPRESS,  IMPLIED  OR  STATUTORY, 
INCLUDING  WITHOUT  LIMITATION  THE  IMPLIED  WARRANTIES  OF  NON-INFRINGEMENT, 
MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR  PURPOSE,  OR  ANY  WARRANTIES 
ARISING  FROM  COURSE  OF  DEALING,  COURSE  OF  PERFORMANCE,  OR  USAGE  OF 
TRADE.    IN NO EVENT WILL THE SELLERS BE LIABLE FOR DAMAGES OR LOSS, INCLUDING 
BUT  NOT  LIMITED  TO  DIRECT,  INDIRECT,  SPECIAL  WILLFUL,  PUNITIVE,  INCIDENTAL, 
EXEMPLARY,  OR  CONSEQUENTIAL,  DAMAGES,  DAMAGES  FOR  LOSS  OF  BUSINESS 
PROFITS,  OR  DAMAGES  FOR  LOSS  OF  BUSINESS  OF  ANY  CUSTOMER  OR  ANY  THIRD 
PARTY  ARISING  OUT  OF  THE  USE  OR  THE  INABILITY  TO  USE  THE  PRODUCT  OR  THE 
SOFTWARES, INCLUDING BUT NOT LIMITED TO THOSE RESULTING FROM DEFECTS IN THE 
PRODUCT OR SOFTWARE OR DOCUMENTATION, OR LOSS OR INACCURACY OF DATA 
OF ANY KIND, WHETHER BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY, 
EVEN IF THE PARTIES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE 
ENTIRE  RISK  AS  TO  THE  RESULTS  AND  PERFORMANCE  OF  THE  PRODUCT  OR  ITS 
SOFTWARE IS ASSUMED BY CUSTOMER.    BECAUSE SOME STATES DO NOT ALLOW THE 
EXCLUSION OR LIMITATION OF LIABLITY FOR DAMAGES, THE ABOV E LIMITATION MAY 
NOT  APPLY  TO  THE  PARTIES.    IN  NO  EVENT  WILL  THE  SELLERS’  TOTAL  CUMULATIVE 
LIABILITY OF EACH AND EVERY KIND IN RELATION TO THE PRODUCT OR ITS SOFTWARE 
EXCEED THE AMOUNT PAID BY CUSTOMER FOR THE PRODUCT. 

 

 

 

 

Summary of Contents for WIPC410 ENHANCED HD













































Reviews: