15
User Manual
Notice (for Initial Use)
Please change the following settings for initial use:
1.
You may have to change the initial passwords of admin, user, and guest. Their
initial passwords are respectively “admin”, “user”, “guest”.
2.
You may also have to set the current
System Time
.
Visit IP Camera from WAN
Port Forwarding
Ensure PC-1 can visit IP Camera-1. Before the computers in WAN (PC-2, PC-3)
can visit IP Camera-1, you must first put the IP Camera -1 into WAN. You can set
Port Forwarding on Router-1 to put IP Camera-1 into WAN.
1.
Open the Router Setting interface on PC-1. The interfaces for different routers
are different, and the Port Forwarding settings are different.
NOTE : You may have to refer to your router’s user manual to finish this part.
2.
For most routers, the Port Forwarding option can be found under Setting /
Firewall Interface. Fill in the IP address and Port of IP Camera-1 into the
corresponding blank.
3.
Select
Status
option and remember the WAN IP address.
4.
Enter the IP address in the browser of PC-1. If IP Camera-1 can be visited via
PC-1, the port forwarding is successful. PC-2 and PC-3 should now also be
able to access IP Camera-1.
Additional Notes: