Aztech VGS3D-VID, User Manual, Page: 26 / 30

A
PPENDIX
A – F
REQUENTLY
A
SKED
Q
UESTIONS
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
26
Do I need to install DirectX™ 6.0 in the Installation CD under
Windows NT
®
4.0?
The DirectX™ 6.0 is meant for Windows
®
95 SR2.1 or later. Do
not install it under Windows NT
®
4.0.
Can I install the VGS3D-VID Graphics Card under Windows
®
95 OSR1 or earlier?
Due to the fact that Windows
®
95 OSR1 or earlier does not have
support for AGP devices, the features of the VGS3D-VID will not
be fully utilised.
After the drivers are installed and Windows restarted, there is
Plug and Play detection of my Monitor. Why is this so?
The Plug and Play detection of your monitor is to enable the
VGS3D-VID Graphics Card to detect the capabilities and limits of
your Monitor’s Supported Resolutions and Refresh Rates. If you
are uncertain of what to choose, just click the “Next” button and
let Windows select the most appropriate drivers for your Monitor.
I do not see the Gamma Utility in my Display Properties.
The Gamma Utility only works for 16-Bit color and above. If you
select 256 color or lower, then the Gamma Utility Tab in Display
properties will not be visible.
How do I reinstall S3 Dometer utility?
Go to the “Utility\Dometer” Directory and right click on the file
“S3dometr.inf”. Choose “Install” and the Dometer utility will be
installed into your Display Properties. Note that all the bundled
utilities are for Windows
®
95 SR2.1 and Windows
®
98 only.