Aztech VGS3D-VID, User Manual, Page: 10 / 30

C
HAPTER
1 – S
ETTING UP
Y
OUR
G
RAPHICS
C
ARD
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
10
1.8 Connecting the Graphics Card
1. Plug your standard 15-pin male monitor cable into the VGA port.
The VGS3D-VID model supports both Composite Video (CVBS) and S-
Video (Y/C). If your TV is equipped with an S-Video Jack , it is
recommended that an S-video cable be connected for better resolution.
Connect one end of the S-Video cable to the S-Video Jack of the
graphics card and the other end to the S-Video In of a TV set.
Otherwise, connect one end of the RCA-type cable to the TV Out Jack
of the graphics card and the other end to the Video In of a TV.
VGA Port
VGS3D-VID
Graphics Card
S-Video Jack
TV Out Jack