Aztech Ethernet USB Combo Router User Manual Download Page 44

Page: 44 / 92

User Manual

IGMP Proxy

IP hosts use Internet group management protocol (IGMP) to report their multicast group

memberships to neighboring routers. Similarly, multicast routers use IGMP to discover

which of their hosts belong to multicast groups. Your router supports IGMP proxy that

handles IGMP messages. When enabled, your router acts as a proxy for a LAN host

making requests to join and leave multicast groups, or a multicast router sending

multicast packets to multicast groups on the WAN side.

IGMP Proxy

Multicasting is a form of limited broadcast. UDP is used to send datagram’s to all hosts

that belong to what is called a Host Group. A host group is a set of one or more hosts

identified by a single IP destination address. The following statements apply to host

groups:

Anyone can join or leave a host group at will.

There are no restrictions on a host’s location.

There are no restrictions on the number of members that may belong to a host

group.

A host may belong to multiple host groups.

Non-group members may send UDP datagram’s to the host group.

Page 44

of 92

Summary of Contents for Ethernet USB Combo Router





























































































Search results

Summary of Contents for Ethernet USB Combo Router

Reviews:

Related manuals for Ethernet USB Combo Router

Brands by name

Popular brands

Aztech Ethernet USB Combo Router, User Manual

Search results

Summary of Contents for Ethernet USB Combo Router

Reviews:

Related manuals for Ethernet USB Combo Router

Brands by name

Popular brands