24
User's Guide
The following error message was prompted when I tried to log in to
DSL Router Commander.
This happens when the link between your Ethernet card and DSL258E
has not been established. Please refer to
section 4.2 - Verifying the
Connection Between the Ethernet Card and DSL258E
.
Go through the commands to locate the error(s).
To correct the error(s), you may type either
config delete
to remove the
last entered command line or
config flush
to remove ALL entered
command lines. Re-enter the correct commands.
Complete the configuration settings with
home , config save
and
restart
.
