PLEASE KEEP THIS EASY START GUIDE FOR FUTURE USE.
7. Install the
Fan Blade
by mounting it into the
Motor
Shaft
. Ensure that the Fan Blade has securely
reached the motor shaft’s retaining pins.
8. With the
Fan Blade
in place, fit the
Fan Blade Cap
into the motor shaft and turn it counter clockwise
to tightly lock in the Fan Blade into the motor shaft.
9. Attach the
Front Grill
by easing it properly against
the Rear Grill. Use the
Fan Grill Clip
, securely lock in
both grills in place.
ASSEMBLING THE STAND FAN
1. Position the fan on a smooth and stable ground
and plug its power adapter to a power outlet.
NOTE: Ensure that there are no objects within
2 meters of the fan’s head that may hinder its
oscillation / swing feature.
2. Firmly lower or raise the fan’s head angle until
you get the desired fan head angle.
3. Press the
ON/SPEED
button to turn ON the fan.
NOTE: By default, the speed is set to LOW. Upon
setting your preferred speed (e.g. high), and
turning it OFF and ON again, the fan would
resume using the previously selected speed (e.g.
high).
TIPS BEFORE USING THE FAN
•
Before use, please check if the power voltage of the fan correctly
corresponds to your home’s power supply.
•
Ensure to insert
two (2) AAA batteries
in the Remote Control’s battery
compartment while observing the correct polarity. If the remote control
would not be used for long periods of time, remove the remote control’s
battery.
•
Should damages be found in the appliance, please do not use the
appliance and immediately bring it to the Aztech Service Center for
repair or replacement.
ADJUST
HEAD TILT
STABLE GROUND
2 METERS
