14
Easy Start
Easy Start
Easy Start
Easy Start
Easy Start
•
For PPPoA routed / PPPoE routed:
The PPP Authorization's
VPI and VCI values
___________________
User Name
___________________
Password
___________________
Auto DNS (Enable/Disable)
___________________
•
The
Encapsulation method
___________________
(By default, the
Encapsulation method
used in IPoA is
LLC SNAP
. Do not change this setting
unless specified by your ADSL Service Provider).
•
The addresses for
LAN IP address
___________________
(default is
192.168.1.1
)
LAN Subnet Mask
___________________
(default is
255.255.255.0
)
Remote Gateway
___________________
(default is
192.168.1.1
)
•
To enable or disable
NAT
__________________
(default is
enabled
)
i
Power on your computer/notebook.
ii
Launch your Web Browser. On the
Address
bar, key in your new LAN IP address if
you have changed it. Otherwise the default is
http://192.168.1.1
(or
http://startmodem
)
and hit <
Enter
>.
iii
From the ADSL Web Management page, click
Expert Mode
>
WAN Connections
.
iv
Click
Create a new service
.
v
Select the required
ATM
protocol and click
Configure
.
vi
Fill in the entries with the above information.
vii
Click
Configure
viii
Click
Save config
. Follow the instructions prompted to save the changes permanently.
Close your Browser to exit ADSL Web Management.
© Copyright December 2002. All Rights Reserved.
P/N: 040-511487-101 (Ref:1100)