Aztec LED PAR-48 RGBW User Instruction Manual Download Page 2

Unpacking: 

Thank  you  for  purchasing  the  LED  PAR  WASH-48  x  3  Watt 

RGBW  by  AZTECELECTRONIC®.  Every  LED  PAR  WASH-48  has  been 
thoroughly  tested  and  has  been  shipped  in  perfect  operating  condition. 
Carefully  check  the  shipping  carton  for  damage  that  may  have  occurred 
during shipping. If the carton appears to be damaged, carefully inspect your 
fixture for any damage and be sure all accessories necessary to operate the 
unit  has  arrived  intact.  In  the  case  damage  has  been  found  or  parts  are 
missing,  please  contact  our  toll  free  customer  support  number  for  further 
instructions.  Do  not  return  this  unit  to  your  dealer  without  first  contacting 
customer support.   

Introduction: 

The  LED  PAR  WASH-48  is  part  of  AZTEC-ELECTRONIC’’s 

continuing pursuit for creating high quality affordable intelligent fixtures. The 
LED PAR WASH-48 is a DMX intelligent LED PAR WASH Lights. This LED 
PAR WASH-48 is light weight and compact which makes it a great piece for 
mobile  DJ’s,  clubs,  theater,  stage  and  many  other  applications.  The  LED 
PAR  WASH-48  has  4  operating  modes;  sound-active,  auto  mode,  Manual
mode, or controlled via DMX controller. It can be used as a stand alone unit 
or in a master-slave configuration.   

Customer  Support: 

AZTEC-ELECTRONICS  provides  a  toll  free  customer 

support line, to provide set up help and to answer any question should you 
encounter problems during your set up or initial operation. You may also visit 
us  on  the  web  at  www.aztec-electronics.com  for  any  comments  or 
suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:00   
p.m. Pacific Standard Time. E-mail: 
[email protected]   

Warning! 

To  prevent  or  reduce  the  risk  of  electrical  shock  or  fire,  do  not 

expose this unit to rain or moisture.   

Caution! 

There are no user serviceable parts inside this unit. Do not attempt 

any  repairs  yourself,  doing  so  will  void  your  manufactures  warranty.  In  the 
unlikely  event  your  unit  may  require  service  please  contact  AZTEC-
ELECTRONIC DEALER / DISTRIBUTOR.   

PLEASE recycle the shipping carton when ever possible. 

 

Summary of Contents for LED PAR-48 RGBW










Reviews: