Aztec Tents QWIK-TOP FRAME, Product Manual

Page: 14 / 32

www.aztectent.com
Step 21:
Continue pulling the other middle sections over the framework and into
position.
Step 22:
Once you’ve reach the other end of the frame open the mating end of
the tent on a drop cloth and pull up and over the framework.
Step 23:
The connection of the fabric sections to one another is achieved
by using either a clasp or a lace connection. Proceed to step 24 for
lace connection. The clasp connection features a male/female metal
clasp system to connect the sections. Start at the ridge of the tent
and connect the tent fabric sections together. As you work your way
down to the perimeter close the Velcro rain fl ap as this will provide the
weather protection to this seam.
Step 24:
The lace connection features a series of webbing loops on one side
of the connection and a series of equally spaced grommets on the
opposing section. Start at the ridge of the tent and insert the lace
cord through the mating grommet of the next section. Pull the lace
cord downward toward the next lace/grommet set. As you insert the
next lace through the grommet of the opposing section pass the lace
through the loop of the preceding lace. You will continue this “lace
chain” until you reach the perimeter of the tent and fi nish by tying and
overhand knot. As you work your way down to the perimeter close the
Velcro rain fl ap as this will provide the weather protection to this seam.
GROUND CL
OTH
GROUND CL
OTH
GROUND CL
OTH