20
ARZUM
21
ARZUM
Product life 7 years
Technical Specifications
220-240V ~50/60Hz 1000 W
The product is in compliance with the EEE Directives.
WEEE
This product contains recyclable materials that compliance with the
WEEE directives. Do not dispose this product as unsorted municipal
waste. Please contact your local municipality for the nearest collection
HANDLING AND SHIPMENT
•
During handling and shipment, your appliance must be kept in original
package in order to prevent damages to its parts.
•
Keep at normal position during shipment.
•
Do not drop the product when transporting and protect from impacts.
•
After delivery of the product, failures and damages that may occur
while transporting are not covered by warranty.
Manufacturer / Importer:
Arzum Elektrikli Ev Aletleri San. ve Tic. A.Ş.
Otakçılar Caddesi No: 78 Kat: 1 B Blok No: B1b Eyüp 34050 İstanbul Türkiye
Made in China
Tel: 444 1 800
www.arzum.com
• Do not insert your hand, spatula, etc. into the blender while the blender
is running.
•
DO NOT
wash your blender in the dishwasher.
6- COFFEE AND sPıCE GRıNDıNG ATTACHMENT
• Put the food you want to grind into the transparent cover of the grinder.
• Place the grinder body on the cover upside down
and make sure it is locked by turning it in the
direction of the lock.
• Place the grinder on the main body of the
processor.
• Make sure it is locked by turning it to the lock
direction
• Set the speed dial to P and start the device.
Note: Dry grinds such as black pepper, coffee
beans, etc. are ground at a rate of not more than
1 cup at a time.
CLEANING AND MAINTENANCE
• When you are done with the appliance, turn off the device by setting
the speed dial to zero "0", and unplug.
• It is important to wash the attachments after each use in order to make
your cleaning easier. Do not leave the attachments in water for a long time.
• Do not wash any of the processor attachments in the dishwasher.
• After each use, wash attachments with soapy warm water. Do not
use anything that may damage the surfaces of the appliance or
attachments, such as abrasive detergents, dishwashers, rinse agents,
and aerosol cleaners for cleaning.
• Store attachments after drying them with a soft clean cloth.
• Never immerse your processor body in any liquid. You can clean it by
wiping with a dry/damp cloth.
• After using the blades, wash and dry immediately. Be especially careful
when washing slicing and chopping blades. These blades can cause
serious injuries as they are extremely sharp. Store the chopping and
mixing metal blade in the special blade guard after they are dried.
• After processing is complete, you can store your device by wrapping
the cable in the wrapping section at the bottom of your device.
• The values declared on the markings on the product or on the
documents given with the product are the values obtained in the
laboratory environment according to the relevant standards. These
values may change depending on the ambient conditions where product
is used.
EN
