Recommend 18 years or older to purchase this product. Person
under 18 must have adult supervision.
Read this manual, understand and follow the manual
instructions for using this product.
Eye and face protection specially designed for paintball use,
must be worn by user and persons within range at all times.
Treat all paintball markers as if it were loaded and able to fire.
Never look down the barrel or breech area of a marker.
Always use barrel blocking device when the marker is not in use.
Always chronograph this marker before playing paintball.
Never shoot any marker at velocities exceeds 300 FPS (Feet
Per Second), or velocities which is greater than local fields or
national laws allow.
•
•
•
•
•
•
•
•
! WARNING !
IMPORTANT SAFETY INSTRUCTION AND GUIDELINES
Ensure all air lines and fittings are tightened and secured before
installing the air tanks.
Do not shoot at people, animals, houses, cars or anything is not
related to the sport of paintball.
Always keep the marker in Safe mode until ready for use.
Fire only 0.68 caliber paintballs with this marker.
Always make sure the bolt is in the un-cocked position when
marker is not in use.
Any modifications or tampering of original factory parts will
cause all warranties and liabilities from Azodin.
This owner’s manual should always accompany this marker
for reference and in the event of resale and new ownership.
•
•
•
•
•
•
•
Tank valves must be installed or removed by qualified personnel.
All tanks must be retested before the expiration date.
Improper use, filling, storage of this air tank may cause death,
serious injury and property damage.
Air tanks must be filled only by properly trained personnel.
Do not over pressurize. Do not expose pressurized tanks to
temperatures in excess of 130F° degrees (54°C).
Do not expose tanks to corrosive materials and do not clean with
caustic cleaners.
Do not alter tanks in any way.
Tanks heated up to a temperature of 250F° degrees (54°C) or
more must be condemned or re-qualified.
Keep air tanks out of reach of children.
The valve should NEVER detach from the tank canister. Should
this occur, seek assistance from a qualified airsmith immediately.
Air tanks are use for the sport of paintball only.
•
•
•
•
•
•
•
•
•
•
•
! WARNING !
IMPORTANT CO2/ HPA AIR TANK SAFETY INSTRUCTION
AND GUIDELINES
When removing the air tank from the marker, check to see if the
regulator / bonnet is unscrewing from the tank. If so, stop unscrewing
the air tank from the marker and contact a qualified airsmith for
further assistance.
Air tanks should unscrew from the marker’s ASA when the tank
is turned counterclockwise.
The regulator / bonnet should stay on the tank during the
removal process.
HPA / N2 air tanks store high pressure air. If this air is released without
using a regulator, it may cause serious injury or death.
STOP IMMEDIATELY
5
GETTING STARTED
1. First, place the BARREL BLOCKING DEVICE over the barrel.
2. Always point the marker in a “SAFE” direction when powering it on.
To turn the marker on, press the top button once. The marker will
show a
Red Light
on the upper LED indicating it is in Safe Mode.
The marker will not fire when the trigger is pulled. In order to
remove the Safe Mode, please press the bottom button once.
The upper Led will change to a
Green Light (Eyes On)
and the
marker is ready to fire.
* For a detailed breakdown of the electronics and its operation
3. Firmly screw in the CO2/ HPA/ N2 air tank onto the
marker’s ASA
.
Turn the air tank all the way in by turning it clockwise.
CAUTION: Never use any hand tool to screw air tank to the
bottom ASA.
4. Attach a paintball hopper/ loader to the marker’s feed neck.
5. Remove the barrel blocking device and unlock the safe mode.
CAUTION: The marker is now LIVE, pulling the trigger will
fire a paintball. Only test the marker at a proper paintball
field or in a safe direction where persons are not present.
6. Check the marker’s velocity using a chronograph. Turning the
Velocity Adjuster (VA01)
clockwise will increase the velocity.
Turning it counterclockwise will decrease the velocity.
7. After playing, remove all paintballs from the hopper and detach
the hopper from the marker.
CAUTION: There may be 1-2 paintballs in the breach area.
Shoot the marker until it is clear of paintballs or turn the
marker upside-down to remove the paintballs.
8. Place the barrel blocking device over the barrel and turn the
marker off. To turn the marker off, press and hold the top button
until the lights disappear.
9. Unscrew the CO2/ HPA/ N2 air tanks from the marker’s bottom
ASA.
CAUTION: Never use any hand tool to screw air tanks to the
bottom ASA.
10. Store the marker in a paintball bag or in a safe place.