1ª 10091 – UK 10 – 2008
25
Meassured in the control board in the conector
jp1
.
Between pins 4 and 9 will be 0 Vcc when tray is in position.
Between pins 4 and 9 will be 5 Vcc when tray is not in its in position.
Floater microswitch(with hydraulic connection to the mains)
Meassured in the control board in the conector
jp1
.
Between pins 4 and 8 will be 5 Vcc when there is no water.
Between pins 4 and 8 will be 0 Vcc with full deposit.
Temperature sensor
Meassured in the control board in the conector
jp16
. values of resistance(ohms) should
be meassured (see values in table of PTC).
Summary of Contents for VITALE S
Page 34: ......
