AWU254
54M Wireless USB Adapter User Guide
- 3 -
Chapter 2: Installation Guide
2.1 Software Installation
2.1.1 Overview
The Adapter’s Setup Wizard will guide you through the installation procedure for Windows
98SE, Me, 2000 and XP
.
This Setup Wizard will install the Wireless Utility and device
drivers.
If you install the hardware before the software, you will be prompted “Found New
Hardware Wizard”, click the Cancel button, and run the Setup Wizard program on the
CD-ROM.
The Setup steps for Windows 98SE, Me, 2000 and XP are very similar. The following setup
steps are for windows 2000.
2.1.2 Software Installation for Windows 2000
1.
Insert the Resource CD into your CD-ROM drive, click the Start button and choose
Run. In the field that appears, enter F:\XXX\Setup.exe (if “F” is the letter of your
CD-ROM drive; XXX presents the setup program path, which is labeled on the
Resource CD), figure 2-1 should then appear.
2.
You can click the Cancel button to end the installation on the Preparing Setup screen,
figure 2-1. Otherwise, the Setup Wizard will display a screen similar to that shown in
figure 2-2 after a moment.
Figure 2-1 Preparing Setup
3.
To continue, click the Next button on the screen, figure 2-2. Click the Cancel button
to end the Installation.
