Page | 7
GAMING KEYPAD
| Manual
When shipping out the keypad to you, it has already pre-installed latest firmware. So
by default you don’t need to install that. You need it only in case you have some
problems and need to reinstall the firmware. Go to
for step by step guide.
Go to the directory where you downloaded the file, then double click on
Azeron-setup-vX.XX.X to install the software.
Sometimes Windows may prevent installation, because it is a new
software it doesn’t recognize:
Just click on the “More info” and then on “Run anyway”.
After that, the software will start to install. When it’s done, there will be
a shortcut icon on Desktop and in the Start menu.
Plug in the keypad USB cable of the keypad in PC and then launch the
Azeron software.
If you are not sure if your PC has the USB3.0 motherboard drivers installed, then we
would suggest to use USB 2.0 port to avoid unpredictable behavior of the keypad.
