
Recalling Memory Channels
1) Calling ‘MAO The ‘MAO’(memory bank A, address (I channel) is called when the power is
turned “ON” or when the program mode is released.
If the ‘MAO’ has already been called by the ‘MAO’ key, the unit returns to the status before the
MAO was pressed.
When the MAO is already called by other key operation other than the MAO key, press the
MAO key again to call MAO channel.
2) Memory Address Change: The MAO is called when the power is turned ‘ON’ or the program
mode is released.
When the M MODF indicator is lit, use the UP/DOWN key to change the memory address and
call a channel to be selected from among 0 through 9.
3) Memory Bank Change: the memory bank is selected by the A/B key.
“ A “ (A blinking) indicates that the memory bank A is called in the B continuous A—b
mode.
A and B memory bank respectively called when ‘‘A’’ and “B” is
Indicated respectively
4) Memory Mode: The unit is in the memory mode when the "M MODE’’ indicated on the
display. ‘The Memory mode key is used to select either Memory Mode or UP/DOWN mode
5) temporary Memory (T. M): Depressing first the "F" and then ‘T. M WR’ (Temporary
Memory Write) allows you to store the content indicated on the display in memory. The
Temporary Memory function is disabled when the unit is in the program mode.
Depressing the TM key will call the out eat stored in it temporary memory. In this Case,
the ‘M. MODE’ Memory Bank and Memory Address indicators disappears. Pressing the TM
key again will allow the unit to return to the status before the temporary memory content
was called.
When you carry out then (UP/DOWN operation after calling the T.M content the unit returns
to the UP/DOWN mode and will allow you to move up or down from the frequency stored in
the temporary memory. In this case, the M MODE indicator disappears and the Memory Bank
indicator and Memory Address Indicator come on. Also the tone frequency will be what is
entered in the UP/DOWN mode.
NB: Tone operation is activated when the tone code indication has already been entered and
then the temporary memory is stored.
— 10 —