6
3
Powering the 1200BT Transmitter
The 1200BT uses 2 “AA” Alkaline batteries for power. The batteries are
placed in the battery compartment by sliding the battery compartment
door [
k
] down and placing the batteries in the compartment as marked
[
♠
].
DO NOT FORCE THE BATTERIES INTO THE COMPARTMENT.
Azden does not recommend the use of rechargeable batteries.
1
2
4
5
6
3
7
8
9
10
♣
♠
SETTING THE TRANSMITTING FREQUENCY ON THE 1200BT
Before the 1200BT can be used, it and the associated receiver have
to be set to the same frequency . This can be accomplished on the
1200BT transmitter by first setting the LCD display to one of two views
- ‘Frequency’ or ‘Channel’. To do this, after installing fresh batteries,
turn the 1200BT to the ON position [
e
]. Next, using the tip of a ballpoint
pen, an unbent paper clip or something similar , press the MODE but-
ton [
j
] repeatedly until one of the two screens below appears.
The Group selections at the bottom of the chart only apply to the 1200URX/Si
