Azbil INFILEX GC WY5311 Specifications & Instructions Download Page 10

AB-6580 

10 

Maintenance (Lithium Battery Replacement) 

Replace the lithium battery for backup (Part No. 83104934-001) for every 5 years. 

IMPORTANT: 

  Since the remaining battery capacity cannot be checked by measuring the terminal voltage, be sure to replace 

the battery every 5 years. 

  Only authorized service personnel is allowed to replace the battery. 

  Do not touch the power supply unit when replaceing the battery. 

  Replace the lithium battery every 5 years if the product is always in use (in ON state). 

  Replace the lithium battery with the power ON. 

  If the product has never or hardly been operated (in OFF state) for a year, replace the lithium battery before the 

product operation. 

 

Battery replacement 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

  Replace the lithium battery with Infilex GC in ON state. 

Figure 7.  Battery replacement 

 

1)  Pull out the battery holder using a slotted screwdriver. 

2)  Disconnect the battery connector and detach the lithium battery from the battery holder. 

3)  Place a new lithium battery in the battery holder and connect the battery connector to it. 

4)  Insert the battery holder into the main body. 

5)  Fill in the date for next replacement (5 years after the replacement) on the indication tag using an oil-based pen. 

5) 

4)

1)

 

2)

Lithium battery 
for backup 

Infilex GC
basic unit

Battery connector

Battery 
holder 

3)

Summary of Contents for INFILEX GC WY5311













Reviews: