background image

10

IMPORTANT NOTE:

•  Fully lined valves which are installed in zone 0 and 20 have to 

be lined with conductive PFA material. A static eliminator device 
has to be assembled in order to connect the plug with the body 
(grounding).

•  AZ valves can be operated manually (e.g. hand lever, gear box) 

as well as mechanical or electrical (e.g. pneumatic, hydraulic or 
electric actuator). 

•  For electrical and mechanical actuators and accessories an own 

declaration of conformity according to code 2014/34/EU may 
have to be considered. 

•  Whenever fully lined valves with non-conductive lining are in-

stalled in explosive areas, AZ-Armaturen GmbH strongly rec-
ommends the use of an anti-static band/earth cable in order to 
ensure grounding of the plug. 

6. Operation and functionality

Ball and plug valves

 are installed in pipeline systems by 

flanging, screwing or welding and are designed to conduct, 
block or control media flow. On/off valves have the open and 
closed position indicated by the lever position (lever longitu-
dinal to the valve = open, lever perpendicular to the valve = 
closed) or by a position indicator on top of the gear box. Flow 
directions of multiport valves are indicated by a notch on the 
plug stem or by a position indicator assembled on top of the 
plug or the gear box. Flow directions of actuated valves are 
indicated by red markings on the coupling between valve and 
actuator. 

Jacketed valves

 are used for particular media in order to 

maintain the process capability or the flow.
  

Summary of Contents for F-2-STD-A

















Reviews: