Ayrton DREAMPANEL TWIN, User Manual

Page: 9 / 19

USER MANUAL _
9
The fixture’s menu functions are described in the following table:
Address
Set Dmx Addr A001~AXXX
Main DMX address
setting
Set LED Addr A001~AXXX LED DMX address setting
Main Universe 00000~65535
Art-Net Universe No for
Main
LED Universe 00000~65535
Art-Net Universe No for
LED
Mode
User Mode Stand Mode
Basic Mode
Extend Mode
Extend Mode 2 universes
User Mode A
User Mode B
User Mode C User’s mode to change
channel numbers
Edit User Max channel
PAN
: Edit DMX profile
Options
Status Pan Reverse
Tilt Reverse
Pan Degree
Tilt Degree
Feedback
Pan/Tilt Spd ON/OFF
ON/OFF
630/540
540/270
ON/OFF
Speed 1~ 4 Pan Reverse movement
Tilt Reverse movement
Pan Degree Select
Tilt Degree Select
Movement Feedback
Pan/Tilt Speed
Service PIN Service PIN
RDM PID
Set IP
Set Device ID Password=XXX
xxxxxx
xxx.xxx.xxx.xxx
Set Device ID Service Password“=050”
RDM PID Code
IP Addr
Fans Control Head Control Auto
Stage
Studio Head Fans Speed Mode
Select
Disp.Setting Shutoff Time
Flip Display
Key Lock
Disp Flash 02~60m 05m
ON/OFF
ON/OFF
ON/OFF Display shutoff time
Reverse 180 degree
Key Lock
No Signal Flash
Signal Select ArtNet
sACN Art-Net
sACN
Temp. C/F Celsius
Fahrenheit Temperature switch
between °C/°F
Initial Pos. PAN =XXX
: Initial effect position
Trigger DMX Value Disp.
Set To Slave
Auto Program PAN, TILT etc.
Slave1,Slave2,Slave3
Master / Alone DMX value display
Slave setting
Auto program
Reset Default ON/OFF Restore factory sett.
Info
Time Info. Current Time
Ttl Life Hrs
Last Run Hrs
Timer PIN
Clr Last Run XXXX(Hours)
XXXX(Hours)
XXXX(Hours)
Password=XXX
ON/OFF
Temp. Info Head Temp. XXX °C/°F
Software Ver V1.2… Software version
Network IP,Mask,Mac Network setting
Test
Home All
Pan&Tilt Reset all motors
Reset Pan&Tilt
Test Channel PAN …… Test function
Manual Ctrl. PAN =XXX
: Fine adjustment of
parameters
Calibration --Password--
PAN
: Password “050”
Calbrate and adjust the
effects to standard/right
position
Preset
Select Prog. Prog. Part 1 = Program 1 ~ 10 Program 1
Prog. Part 2 = Program 1 ~ 10 Program 2
Prog. Part 3 = Program 1 ~ 10 Program 3 Select programs to be run
Edit Prog. Program 1
:
Program 10 Program Test
Step 01=SCxxx
Step 64=SCxxx Testing program
Program in loop
Save and exit
Edit Scenes Edit Scene 001
~ Edit Scene 250 Pan,Tilt,……
--Fade Time--
--Secne Time--
Input By Outside Save and automatically
return
manual scenes edit
Scenes Input XX~XX Automat. scenes rec
DREAMPANEL TWIN CONTROL PANEL MENU –
OPTION DETAILS
The following section provides details on the options that can be selected
through the control panel menu. Refer to the table above.
Note: You can exit this menu at any time by pressing “Mode Esc” repeatedly
until you return to the home screen.
ADDRESS
SET DMX ADDR
Allows you to change a DMX address from the fixture’s control panel.
w Access the menu by pressing the “Mode Esc” key.
w Go to the “ADDRESS” menu and press “Enter”, then find “Set DMX
Address.”
w
Use the up/down arrows to scroll through until you locate the desired
address and press “Enter” to confirm.
SET LED ADDR
Allows you to change the LED DMX address from the fixture’s control
panel.
w Access the menu by pressing the “Mode Esc” key.
w Go to the “ADDRESS” menu and press “Enter”, then find “Set LED
Address.”
w Use the up/down arrows to scroll through until you locate the desired
address and press “Enter” to confirm.
SET MAIN UNIVERSE
Allows you to set the Main Universe address from the fixture’s control
panel.
w
Access the menu by pressing the “Mode Esc” key.
w
Go to the “ADDRESS” menu and press “Enter”, then find “Set Main
Universe.”
Use the up/down arrows to scroll through until you locate the desired
Universe address and press “Enter” to confirm.
SET LED UNIVERSE
Allows you to set the LED Universe address from the fixture’s control panel.
w Access the menu by pressing the “Mode Esc” key.
w Go to the “ADDRESS” menu and press “Enter”, then find “Set LED
Universe.”
Use the up/down arrows to scroll through until you locate the desired
Universe address and press “Enter” to confirm.
MODE
USERS MODE
Allows you to select the DMX mode from the following: “Basic Mode”
(18 DMX channels ), “Standard Mode” (20 DMX channels), “Extended
Mode” (272 DMX channels), “Extended Mode 2” (272 DMX channels – 2
universes), “User Mode A”, “User Mode B”, “User Mode C.”
w Access the menu by pressing the “Mode Esc” key.
w Use the up/down arrow keys to reach the “MODE” menu and press
“Enter.” Then from “User Mode” choose one of the 7 modes above.
Consult the “CHART DMX” table for more information on Basic, Standard,
Extended Mode and Extended Mode 2 universes. “User Modes A”, “B”,
or “C” are user-definable.