Ayrton DREAMPANEL TWIN, User Manual

Page: 5 / 19

USER MANUAL _
5
The DREAMPANEL TWIN luminaire has an IP20 protection rating.
It is intended strictly for indoor use. It must never be partially or fully
submerged, even temporarily.
Condensation may form on your DREAMPANEL TWIN in the following
cases:
• Immediately after turning on the heating
• In places with fog or a high level of humidity
• When the luminaire is suddenly moved from a cold to a warm
environment, or vice versa.
In such cases, you must wait until the luminaire readjusts to the ambient
temperature of the room where it will be installed for operation.
Do not shake the DREAMPANEL TWIN while installing or handling.
Do not pull the DREAMPANEL TWIN by one of its cables to move it. Lift the
luminaire by its handles.
Choosing the appropriate place to install the DREAMPANEL TWIN is
essential. The following points should be observed:
• Do not expose it to a heat source.
• Do not install it near flammable materials.
• Be sure that dust or miscellaneous debris cannot clump around the
body of the luminaire as this may interfere with its optimal cooling and
proper operation.
• The DREAMPANEL TWIN must be installed out of reach of the public
and all persons not authorized to operate the luminaire.
We recommend a minimum distance of 20 cm between the outside
surface of the light and the illuminated object. The color mixture of the
DREAMPANEL TWIN can be improved if the illuminated surface is very
close to the luminaire (up to about 50 cm).
Due to the nature of its cooling principle, you should never prevent air
from circulating around the body of the luminaire. You must provide a
minimum clearance of 20 cm around your DREAMPANEL TWIN to allow
for cooling.
The DREAMPANEL TWIN can be installed in a ground pit or any other
confined enclosure only under certain conditions. With this kind of
installation, a system of forced ventilation should be used up to allow
air to circulate freely around the luminaire(s). The air must be constantly
renewed because the luminaire cannot be operated in closed system.
Failure to comply with these requirements may destroy or prematurely
wear the DREAMPANEL TWIN, and AYRTON cannot be held responsible.
Please consult your AYRTON dealer for more information on this type of
installation.
No load should be placed on the DREAMPANEL TWIN. The fixture must
not be installed in such a way as to allow a person, vehicle or any object
to run over or park on it.
Never lay or drop any hard, heavy, or blunt, objects on the DREAMPANEL
TWIN. This includes items made of glass or porcelain (e.g., bottles,
dishware, or glass beads). The luminaire is made of materials such as
plastic and extruded aluminum, making it resistant but not unbreakable.
Objects made of hard materials such as steel or glass that fall on the unit
may cause breakage of the plastic parts or the body. AYRTON cannot be
held responsible for the luminaire’s broken plastic parts or body, which are
not covered under warranty.
The temperature of the room where the DREAMPANEL TWIN is installed
must never exceed 45°C (Ta = 45°C).
The DREAMPANEL TWIN luminaire requires a 110-240 VAC supply
voltage. Check that your luminaires have been installed for an application
that is compatible with this information.
Check that the brackets on which you hang or attach your DREAMPANEL
TWIN can sustain the weight of the luminaire (25kg), taking into
consideration all necessary safety factors.
Do not use your DREAMPANEL TWIN before being familiar with these
recommendations and do not allow unqualified personnel to handle the
product.
To transport your DREAMPANEL TWIN, we strongly recommend that you
use the complete original packaging, including the dense protective foam
inserts.
If your DREAMPANEL TWIN is not being used for a long period, you should
disconnect the luminaire from the power source.
Never dispose of the DREAMPANEL TWIN in a rubbish bin. Ensure that
it is recycled. Please consult the current legislation in your country on
recycling electronic equipment.
WARNING!
The number of daisy chain, or tandem, connections to the
DREAMPANEL TWIN (power input and output sockets on the
luminaires) is limited for safety reasons. The maximum authorized
number of connections is as follows, with the power line protected
by a 10A circuit breaker:
• 2 DREAMPANEL TWIN units on the same source at 230 VAC
or
• 1 DREAMPANEL TWIN units on the same source at 110 VAC.
PRESENTATION AND FEATURES
DREAMPANEL TWIN is a non-waterproof moving head wash light (IP20
protection rating) using the latest generation of high-performance of LED-
type lamps.
This luminaire can be controlled remotely by an external DMX512 signal.
The DREAMPANEL TWIN incorporates multi-chip LEDs using 4 colors:
Red, green, blue and white.
This color-light luminaire operates on the CMY additive color principle and
along with white light can potentially render a palette of 4.2 billion colors.
The DREAMPANEL TWIN has a total of 64 LEDs that can be controlled
independently. The luminaire requires from 18 to 272 DMX channels to be
controlled via an external command system that sends a DMX512 signal
(see below for details).
To adjust the settings on the DREAMPANEL TWIN (i.e., DMX address,
DMX operating mode and other options), a Remote Device Management