Ayrton AYRLEV101, User Manual, Page: 13 / 20

USER MANUAL _
13
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Info”.
w Double click to access “Info” turn the jog wheel to select “Time Info.”.
w Double click to access “Time Info.” The display will show “Ttl Life Hrs”.
w Double click to access “Ttl Life Hrs” The display will show “XXXX
(Hours)”.
w Double click the jog wheel to back to last button press –“Time Info”
then back to main menu by double click again.
Last Run Hrs
Shows the fixture’s length of operation since the last time this counter
was reset.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Info”.
w Double click to access “Info” turn the jog wheel to select “Time Info.”.
w Double click to access “Time Info.” The display will show “Last Run
Hrs”.
w Double click to access “Last Run Hrs” The display will show “XXXX
(Hours)”.
w Double click the jog wheel to back to last button press –“Time Info”
then back to main menu by double click again.
Timer PIN
The “Timer PIN” is the password required to reset the counter for “Last
Run Hrs.” The PWD is 038.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Info”.
w Double click to access “Info” turn the jog wheel to select “Time Info.”.
w Double click to access “Time Info.” The display will show “Timer PIN”.
w Double click to access “Timer PIN” The display will show
“Password=038”.
w Double click the jog wheel to back to last button press –“Time Info”
then back to main menu by double click again.
CLR LAST RUN
After entering the “Timer PIN”, you can reset the value for “Last Run Hrs”
through this menu.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Info”.
w Double click to access “Info” turn the jog wheel to select “Time Info.”.
w Double click to access “Time Info.” The display will show “Clear Last
Run”.
w Double click to access “Clear Last Run” The display will show “OFF”
turn the jog wheel to select“ON”.
w Double click the jog wheel to back to last button press –“Time Info”
then back to main menu by double click again.
TEMP. INFO
Head Temp.
Shows the current temperature of the fixture head.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Info”.
w Double click to access “Info” turn the jog wheel to select “Temp Info”.
w Double click to access “Temp Info” The display will show “Head Temp.”.
w Double click to access “Head Temp.” The display will show “XXX °C/
°F”.
w Double click the jog wheel to back to last button press –“Temp Info”
then back to main menu by double click again.
SOFTWARE VER
Displays the software version of the fixture.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Info”.
w Double click to access “Info” turn the jog wheel to select “Software Ver”.
w Double click to access “Software Ver” The display will show “Ver x.x.x”.
w Double click the jog wheel to back to last button press –“Software Ver”
then back to main menu by double click again.
TEST
HOME
Allows you to reset the functions. You can select these functions by
adjusting the channel.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Test”.
w Double click to access “Test” turn the jog wheel to select “Home”.
w Double click to access “Home” The display will show“All” Turn the jog
wheel to select “All” “Pan&Tilt” “Color” “Gobo” or “Other”.
w Double click the jog wheel to back to last button press –“Test” then
back to main menu by double click again.
TEST CHANNEL
Tests each of the fixture’s settings (e.g., PAN, TILT).
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Test”.
w Double click to access “Test” turn the jog wheel to select “Test Channel”.
w Double click to access “Test Channel” The display will show“Pan” Turn
the jog wheel to select other channel.
w Double click the jog wheel to back to last button press –“Test” then
back to main menu by double click again.
MANUAL CTRL.
Allows you to access all the fixture’s settings manually (e.g., PAN, TILT).
The shutter and the electronic dimmer are by default 100% open.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Test”.
w Double click to access “Test” turn the jog wheel to select “Manual
control”.
w Double click to access “Manual control” The display will show“PAN=XXX”.
w Double click the jog wheel to back to last button press –“Test” then
back to main menu by double click again.
CALIBRATION
Calibrates certain settings such as Pan, Tilt and Zoom. The password
required to access the calibration function is 050.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Test”.
w Double click to access “Test” turn the jog wheel to select “Calibration”.
w Double click to access “Calibration” The display will
show“Password=050”.
w Double click the jog wheel to back to last button press –“Test” then
back to main menu by double click again.
PRESET
SELECT PROG.
Allows you to select the program for “Program Run.”
EDIT PROG.
Allows you to edit internal programs.