Ayrton AYRLEV101, User Manual, Page: 12 / 20

USER MANUAL _
12
jog wheel to select“ON”.
w Long click to exit menu–“Display Setting” then back to main menu by
long click again.
SIGNAL SELECT
Signal Select
This menu allows you to choose which type of signal is used to control the
fixture (DMX or WDMX).
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display “Options”.
w Double click to access “Options”turn the jog wheel to select “Signal
Select”.
w Double click to access “Signal Select”The display will show “DMX”
w Turn the jog wheel to select “DMX” or “WDMX”
w Double click to confirm
w Long click to exit menu –“Signal Select”then back to main menu by
long click again.
TEMP. C/F
Allows you to select the unit of measurement for the temperature values,
in either Celsius or Fahrenheit.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Options”.
w Double click to access “Options” turn the jog wheel to select
“Temperature C/ F”.
w Double click to access “Temperature C/ F” The display will show
“Fahrenheit” Turn the jog wheel to select “Celsius”.
w Double click t confirm
w Long click to exit menu –“Temperature C/ F” then back to main menu
by Long click again.
INITIAL POS.
Controls the initial position of the fixture’s effects.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display “Options”.
w Double click to access “Options” turn the jog wheel to select “Initial
Pos.”.
w Double click to access “Initial Pos.” The display will show “PAN=XXX”.
w Long click to exit menu –“Initial Pos.” then back to main menu by long
click again.
WIRELESS DMX
This menu allows you to activate, activate and resend data via XLR plug
or reset wireless pairing.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display “Options”.
w Double click to access “Options” turn the jog wheel to select “Wireless
DMX”.
w Double click to access “Wireless DMX” The display will show “Activate
WDMX” Turn the jog wheel to select “Act&Data Out” or “Rest WDMX” to
reset Wireless pairing
w Double click the jog wheel to back to last button press –“Wireless DMX”
then back to main menu by double click again.
TRIGGER
DMX Value Disp.
Allows you to view the DMX value received for each setting. The “ALL”
option will display only the setting being edited.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Options”.
w Double click to access “Options” urn the jog wheel to select “Trigger”.
w Double click to access “Trigger”menu The display will show “DMX Value
Disp”.
w Double click to access “DMX Value Disp” The display will show
“PAN=……..”.
w Double click the jog wheel to back to last button press –“Trigger” then
back to main menu by double click again.
Set To Slave
Sets the fixture to SLAVE Mode for receiving instructions from a master
luminaire (see Master/Save mode settings, below).
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Options”.
w Double click to access “Options” turn the jog wheel to select “Trigger”.
w Double click to access “Trigger”menu The display will show “Set To
Slave”.
w Double click to access “Set To Slave” The display will show “Slave1”
“Slave2” “Slave3”.
w Double click the jog wheel to back to last button press –“Trigger” then
back to main menu by double click again.
Auto Program
Allows you to run an internal program (a sequence of scenes) by selecting
whether the fixture is operating alone or as a master.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Options”.
w Double click to access “Options” turn the jog wheel to select “Trigger”.
w Double click to access “Trigger”menu The display will show “Auto
Program”.
w Double click to access “Auto Program” The display will show “Master”
“Alone”.
w Double click the jog wheel to back to last button press –“Trigger” then
back to main menu by double click again.
Note: See “AUTO” menu to create internal programs.
RESET DEFAULT
Restores the factory default settings on the fixture.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Options”.
w Double click to access“Options” turn the jog wheel to select “Reset
Default”.
w Double click to access“Reset Default”menu The display will show “OFF”
Turn the jog wheel to select“ON”.
w Double click the jog wheel to back to last button press –“Reset Default”
then back to main menu by double click again.
INFO
TIME INFO.
Current Time
Shows the number of hours the fixture has been operating since it was
powered on.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Info”.
w Double click to access “Info” turn the jog wheel to select “Time Info.”.
w Double click to access “Time Info.” The display will show “Current Time”.
w Double click to access “Current Time” The display will show “XXXX
(Hours)”.
w Double click the jog wheel to back to last button press –“Time Info”then
back to main menu by double click again.
Ttl Life Hrs
Shows the fixture’s total number of hours of operation.