14.) The router will reboot. This will take about a minute, and you’ll see:
router will now reboot...
15.) The router will then revert back to the login screen. If the login screen does not
come up and you get a timeout message, wait ten seconds and click the browser’s
refresh button.
16.) Connect the router’s WAn port to your Internet connection (DSL, Cable, Satellite modem,
fixed wireless radio, etc.). Wait a few seconds, then see if you can access the Internet
from the computer connected to the router. If you can, you’re done. If not, see the
Troubleshooting section, page 7.
If you don’t have one, at this point you’ll want to set up an account on ayrmesh.com
– the service and monitoring portal for the AyrMesh network. It’s easy and free – just
type ayrmesh.com into the uRL bar of your browser and click on the link that says,
No
username? Sign up now – it’s free!
Fill in the signup page. Choose a username
and a strong password. The username
and password you choose will also be the
password for your Router and Cameras.
Include an active email address so we can
contact you if needed.
On ayrmesh.com, you can monitor and control your AyrMesh network. note that, once
you have set up the router, it will appear on your front page:
Finally, if you have an AyrMesh Hub, you can plug it into any of the “LAn” ports of the
router and install it per the installation instructions on ayrstone.com. If you don’t have an
AyrMesh Hub, please take a look at our website and learn how you can benefit from
extending your network outside and across your property!
Ayrstone AyrMesh Router HP Setup
6