DMX operating mode
While in the DMX mode, it is possible to select the working mode of the laser. That way, you can either
choose to use your own programmed presets of your DMX controller, or to activate the music
activated/automatic working mode of the laser to have a fully-automatic lasershow. Depending on the starting
address you selected earlier, the laser responds to the following commands. In this example, we use DMX
starting address 1. When you use a different DMX-starting value, for example 29, the unit will respond from
channel 29, 30, 31.. and so on.
For more information about DMX, consult the manual of your DMX controller or software.
Channels
DMX value
control content
CH1
0-255
X axis control
CH2
0-255
X axis fine control
CH3
0-255
Y axis control
CH4
0-255
Y axis fine control
CH5
0-255
X, Y axis movement speed
CH6
0-7
Shutter closed
8-134
Shutter open
135-238
Strobe from slow to fast
239- 255
Shutter open
