Colour section
The Colour section involves everything that has to do with the
colours a certain device can produce.
The colour systems in your fixtures operate differently.
Spotlight moving heads and scanners make use of a colour wheel
where various fixed colour filters are used to change the colour of
the light beam.
Static LED spotlights and LED wash moving heads on the other
hand use an RGBW or even an RGBAW+UV light source to
create countless colour combinations.
To ensure that the colours blend properly, the colour presets are
based on a colour wheel with a choice of 9 base colours.
- Colour Chase: use this wheel to choose a built-in Colour Chase.
Chase 1 is static and will only make use of the selection you
make for Colour 1.
With the other programs (2-8), the colours you chose for Colour 1
and Colour 2 will be alternated on various fixtures.
Please note, when selecting a Colour Chase (2-8), if you set the
same colour presets for Colour 1 and Colour 2, then the colour
will not alternate.
- Colour 1: select 1 of the 9 available colours as the main colour.
- Colour 2: select 1 of the 9 available colours as the sub colour.
Please note,
a device with a colour wheel may have more
difficulty alternating quickly between colours if the sub colour is
located on the other side of the wheel, for instance. The wheel
would need to rotate halfway around to get to that colour, and
may show the other colours in the process. To avoid this effect,
select colours that are next to each other in the colour wheel,
select a static colour, or lower the alternating speed.
Devices with a multiple LED light source are able to process
alternating colours quickly.
Gobo section
Because every Ayra fixture is equipped with various types and quantities of gobos, the OSO Maestro has
corresponding gobo wheels so the user can choose between the 9 available gobos. Because different
devices have different gobos, the Gobo section will usually deviate so that if you select Gobo 3 using the
Gobo 1 wheel, you may end up with 2 different gobos on 2 different devices.
The gobo wheel works the same way as the colour wheel. Select the main gobo with Gobo 1 and the sub
gobo with Gobo 2 and have them alternate in a Gobo Chase if desired.
It is also recommended to select gobos that are next to each other on the gobo wheel for optimal results.
There is a choice between 9 gobos and for Gobo Chase 1, only the main gobo will be used without chase.
The information in this user manual is subject to change at any time without notice.
Version: 1.0
Date of creation and author's initials:31-03-2018 RV
Revision date and author's initials: -