background image

going to be serviced.

Fuses:

- The main fuse of this device is to be found on the rear of the device. In most cases, directly next to the 
power inlet. 
- Only replace a fuse for a new one with the same type and rating! Do not use a fuse with a higher or lower 
rating.
- Do not bridge the fuse with electrical wires, aluminum foil, as the fuse is used for protection against 
electrical shocks and short circuiting. 
- Always mount the fuse cover back on the fuse compartment. 

Symbol clarification:

WEEE: 

Dispose of this product properly. This product is part of the WEEE directive – the 

Waste Electrical and Electronic Equipment directive. The requirements stated in this directive 
apply to all manufacturers and producers of electronic equipment in the EU. 

Do not dispose of this product together with regular household rubbish. Contact your local 
government for more information about proper disposal and recycling of electronic products in
your region. By recycling this product properly after use, we can work together to enjoy these 
products and also protect our environment from being polluted.

CE: 

The CE mark indicates that the product complies with applicable European directives and

regulations. 

Indoor use only: 

This device is designed to only be used indoors. The maximum ambient 

temperature should not exceed 40 degrees Celsius (104 degrees Fahrenheit)

Any information and illustrations shown in this user manual are subject to change without further notice.

User manual version: 1.0

Creation date + author initials: 03-11-2015 RV Revision date + author initials: -

Summary of Contents for 9000-0021-6271












Reviews: