- 15 -
4. DRY VACUUM CLEANING
WARNING! Ensure you read,
understand and apply Section 1
‘Safety Instructions’.
Reminder: DO NOT vacuum hazardous
substances. Use of an incorrect dust
bag will invalidate your warranty.
4.1. Ensure the machine is unplugged
from the power supply.
4.2. In order to prepare your vacuum for
dry vacuuming, verify that the
cartridge filter is securely mounted.
Make sure the filter is pushed in
until it stops against the power head.
(fig.2) (Your Wet/Dry Vac comes
with the cartridge filter pre-installed,
if not see page 10 for installation
instructions.)
4.3. You can cover the Cartridge filter
with the orange Cloth pre filter bag
to reinforce the dustproof effect.
(You can’t use the orange Cloth pre
filter bag singly) (fig. 3)
4.4. Or remove the top section and fit
optional dust bag flange onto the
inlet stub, taking care not to damage
the bag. (fig. 4)
4.5. Reposition the head onto the drum
body, and clip in place.(fig.5)
4.6. Insert the larger end of the flexible
hose into the front inlet on the
container and lock in place. Push the
required attachment onto the free
end of the hose.(fig.6)
4.7. Plug in the power supply.(fig.7)
4.8. Turn the motor on by flipping the
switch to the ‘I’ ON position. (fig.8)
4.9 . When you have completed
vacuuming, press the switch to ‘Off‘.
(position ‘O’), and unplug from power
supply. Regularly check the dust bag
and dispose of safely when it is 2/3
full. The bag is manufactured so that
only air, not dust, will pass through
the paper and as such the dust bag
must not be re-used.
DO NOT use the dust bag for wet or
sharp materials.
