34 35
INSTRUCTION MANUAL
Connect the hose to the cleaner
When connecting the hose, please press the main suction pipe button, point the end at the air
inlet and push it in until it is completely locked.
Telescopic tube / Floor brush
1. Screw the telescopic tube in
2. Slide the button to adjust the length of telescopic tube. Move the slider back and forth to
adjust the suction power.
3. To fit the floor brush, manually screw the telescopic tube into the floor brush.
1
Connect hose to Cleaner
When Installing the hose, please hold the main suction pipe button, and aim at the air inlet, then
push till it is completely locked.
Telescopic tube
Screw the telescopic tube in
Screw the telescopic tube out
Slide the tutton forth and back to adjust the
suction power
Slide the button to adjust the length of telescopic tube
Floor Brush
For installing a floor brush, manually screw the telescopic tube into the floor brush
1
Connect hose to Cleaner
When Installing the hose, please hold the main suction pipe button, and aim at the air inlet, then
push till it is completely locked.
Telescopic tube
Screw the telescopic tube in
Screw the telescopic tube out
Slide the tutton forth and back to adjust the
suction power
Slide the button to adjust the length of telescopic tube
Floor Brush
For installing a floor brush, manually screw the telescopic tube into the floor brush
2
for carpet
for hard floor
-
Turn left for a better hard
floor perfmance
-
Turn right when not for hard
floor suction
Connect telescopic tube to dusting brush and crevice tool
On/ off button
Press to switch on and
Cord rewind button
Press to rewind the power
cord
Floor brush
For daily cleaning of carpets, wooden floors .
Setting the floor brush for carpets , tile floors or wood parquet:
A Hard floors = Extended brush strip
B Carpets = Pulled in brush strip
C Slide to the left for a better hard floor performance
Slide to the right when not cleaning hard floors
Dusting brush/crevice tool
• Cleaning corners or other unaccessible places.
• For cleaning of curtains , shelves , books , lamps and other sensitive objects .
OPERATION
Vacuum cleaning
1. First pull out the cable sufficiently and insert the plug into the wall socket. The yellow marking
on the cable indicates the maximum length which must not be exceeded. Turn off the machine
by pressing the On/Off button
.
2. It is recommended to set the electronic power controller to MIN before turning on the unit.
2
for carpet
for hard floor
-
Turn left for a better hard
floor perfmance
-
Turn right when not for hard
floor suction
Connect telescopic tube to dusting brush and crevice tool
On/ off button
Press to switch on and
Cord rewind button
Press to rewind the power
cord
A
B
C
Summary of Contents for ZW0926
Page 22: ...42 43...