6/2017
IMPORTANT INFORMATION
Ayce power tool reserves the right to change and improve the
design and the technical specifications of this product at any time
and without prior notice.
NOISE/VIBRATION INFORMATION
Measured sound values determined according to EN 60745-1.
WEAR HEARING PROTECTION!
Vibration total values (triax vector sum) determined according to EN 60745-1: The
vibration emission value given in this information sheet has been measured in
accordance with a standardised test given in EN 60745-1 and may be used to
compare one tool with another. It may be used for a preliminary assessment of
exposure. The declared vibration emission value is for the main applications of
this tool. However, if the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission value may differ. This
may significantly increase the exposure level over the total working period. An
estimation of the level of exposure to vibration should also take into account the
times when the tool is switched off or when it is running but not actually being
used. This may significantly reduce the exposure value over the total working
period. Additional safety measures should be taken to protect the operator from
the effects of vibration, such as: maintaining the tool and the accessories, keeping
the hands warm and organisation of work patterns.
OPERATION
1.
Before use
• Remove any packing material and loose parts.
• Check the accessories before use. They should fit the machine and your
purpose.
2.
Functions
d
Installing/removing router bit (Fig.1)
1.
Keep the spindle lock button depressed
and rotate the spindle until the spindle
lock fully engages.
2.
Loosen the collets nut using the wrench.
Insert the shank of the router bit into the
collets.
3.
Keep the spindle lock button depressed
and tighten the collet nut using the
wrench.
4.
Release the spindle lock.
To remove the bit
1.
Keep the spindle lock button depressed.
2.
Loosen the collets nut using the wrench
and remove the bit.
3.
Tighten the collect nut and release the
spindle lock.
NOTE
: Unplug the router before installing the
bit.
b
Installing cutting guide (Fig.2)
1.
The cutting guide is an effective aid to
cutting in a straight line when chamfering
or grooving.
2.
Loosen the two screws for the cutting
guide.
3.
Feed the bars on cutting guide through the
holes in the base plate.
4.
Adjust the distance between the router bit
and the parallel guide by moving the guide
until it is at the correct distance.
5.
Tighten the screws for parallel guide to
Fig.1
Fig.2
94
|
95
GB
94
l
95
GB