2. Make sure the voltage is the same as that indicated on
the rating plate of the appliance.
3. Do not operate this appliance if the cable or plug
becomes damaged.
4. Keep the appliance and cable away from sources
of heat, sharp objects or anything that may cause
damage.
5. If the cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
6. Ensure the appliance is switched off before connecting
to the mains power supply.
7. Switch off the power supply and disconnect from
mains supply when not in use, before cleaning or other
maintenance.
8. To disconnect the appliance, switch it “OFF”, and then
remove the plug from outlet. Do not pull the cord to
disconnect the plug.
9. The heater must not be located immediately below a
socket-outlet.
10. Do not operate in areas where gasoline, paint or other
flammable liquids are used or stored.
11. Indoor use only.
12. In order to avoid overheating, do not cover the heater.
13. To prevent a possible fire, do not block air intakes or
exhaust in any manner.
14. Don’t touch the hot surfaces.
15. Do not insert or allow foreign objects to enter any
ventilation or exhaust opening, as this may cause an
electric shock, fire or damage to the appliance.
44 45
GB
Summary of Contents for 2017.08.03
