510
58 0
70
56 0
485
min 38
100m
m
65m
m
4 zones induction hob
2.INSTALLATION
DIMENSION FOR RECESSING
IN
Caution
Good ventilation is required around the appliance
for easier dissipation of
heat and low power
consumption.
Sufficient clearance is required around the
appliance.
The appliance should not be placed near anything
that may echo
9.5cm
-17 -
cabinet
IMPORTANT
The distance from the back edge of
the hole to the wall or
cabinet must be at least 100
mm. If the cooker is thicker
than 30 mm, or if it is
recessed in a worktop, the
ventilation cover must
be
fitted
as
shown
in
the
diagram
below
.
MPORTANT
The induction hob must be well ventilated and the air inlet and outlet
must not
be blocked.
POSITIONING
ABOVE A DRAWER
The electrical circuits in the cooker must have an
adequate circulation of
air in order to be correctly
cooled. Pay attention to the points below. A
larger
distance between the appliance and an underlying
cabinet ensures
better functionality.
IMPORTANT
The appliance must be provided with an air inlet at
the back and air outlet at the
front
.
ABOVE A CUPBOARD WITH DOOR
When the air outlet is under the appliance:
A: An air outlet grille should preferably be
placed
between the appliance and the
cabinet door. This is
easy if the crosspiece is
thin.
10mm min
.
