![background image](http://html1.mh-extra.com/html/aya/adw09000a-w/adw09000a-w_instructions-for-use-manual_3041845027.webp)
Compartment
A:
With each wash cycle.
Compartment B:
For programmes with pre-wash only.
(Follow the user instructions!)
Mechanical indicator
C.
Electric indicator on control panel (if provided).
Check the rinse aid level
(On models with water softener system only.)
Electric indicator on control panel (if provided).
If there is no salt warning light in the control panel
(for some models), you can estimate when to fill the salt into
the softener by the number of cycles the dishwasher has run.
Check the regeneration
salt level
Load the baskets
Select a programme
T urn on the water tap and press the Start/reset button. The machine will start working
after about 10 seconds.
Running the dishwasher
Switch off the appliance
Turn off the water tap,
unload the baskets
Fill the detergent dispenser
Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to
avoid handling the dishes and utensils while they are still hot and more susceptible to
break.
They will also dry better.Unload the appliance, starting from the lower basket.
Changing the programme
Add forgotten dishes in
the dishwasher.
Scrape off any large amount of leftover food. Soften remnants of burnt food in pans,
then load the baskets. Refer to the dishwasher loading instructions.
When the working cycle has finished, the buzzer of the dishwasher will sound 8 times,
then stop.
Turn off the appliance using the ON/OFF button.
If the appliance is switched
off during a wash cycle.
If the appliance is switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state ).
Switch on the appliance
Press the On/Off button to switch on the appliance, Open the door .
1.Press the Start/reset button to stop the dishwasher.
2.After the spray arms stop working, you can open the door completely.
3.Add the forgotten dishes.
For detailed operating method read the corresponding content on the instruction manual.
1. A running cycle can only be modified if it has been running for a short time. Otherwise
the detergent may have already been released and the water already drained. If this is
the case, the detergent dispenser must be refilled.
2. Press the Start/Reset button for more than 3 seconds to cancel the running programme.
3. Select a new programme.
4. Restart the dishwasher.
C
3 mm
20 mm
10 mm
3 mm
Quick operation guide
Open the door carefully.
Hot steam may escape
when the door is opened!
WARNING!
Close the door, turn the knob to select the desired programme
( See the section entitled
“
Operationg instruction
”
)
4.Close the door, then press the Start/reset button,the dishwasher
will start running again after 10 seconds.
Summary of Contents for ADW09000A+W
Page 1: ...13 mm 80 mm 17 mm 42 mm 6 mm 10 mm 6 mm ADW09000A W ...
Page 52: ......