9
2.1.1.
Verify that the operation and maintenance manual is included with the Airprep System
when it is received. Verify that the operation and maintenance manual is included with
the Airprep System when it is delivered to the purchaser.
2.1.2. This equipment is intended for knowledgeable and experienced users. No person or
persons should be allowed to operate this equipment without first receiving proper
training in the use of this equipment.
2.1.3. Immediately notify Axxiom Manufacturing, Inc. of any instances of use of this
equipment in any manner other than the intended application. See Section 4.0.
2.1.4. Only qualified personnel should load and unload this equipment for shipping. Slings or
other lifting devices must only be attached to the designated lifting points. See Section
2.6.
2.1.5. For further information contact:
Axxiom
Manufacturing,
Inc.
11927
South
Highway
6
Fresno, Texas 77545
Phone:
1-800-231-2085
Fax:
1-281-431-1717
Website: www.axxiommfg.com
2.2
Air Dryer System (ADS) Operating Specifications
Maximum Working Pressure
150 psi @ 250
F
Minimum Operating Temperature
35
F @ 150 psi
Air Flow Capacity
See section 6.0 table 1
Tank
Volume
See
table
below
MODEL NO.
ADS 250
ADS 400
ADS 750
ADS 950 ADS 1200 ADS 1600 ADS 2000
ADS 2500 ADS 3500
VOLUME (cu ft)
(Liters)
4.4
(125)
8.4
(238)
14.9
(422)
22.4
(634)
24.1
(682)
28.1
(796)
40.3
(1141)
45.0
(1274)
62.8
(1778)
APPROXIMATE
DELIQUESCENT
STORAGE (cu ft)
(Liters)
2.5
(71)
4.0
(113)
7.25
(205)
9.5
(269)
12.0
(340)
16.0
(453)
20.0
(566)
25.0
(708)
35.0
(991)
2.3
Important Reference Numbers
Fill in the M Series Abrasive Blaster model number and serial number in the blank spaces
below. These will be used for reference whenever service or maintenance is required.
AirPrep System Model Number
AirPrep System Serial Number
National Board Number
2.4 Vessel
Information
2.4.1. All pressure vessels used in Schmidt Abrasive Blasters are manufactured in strict
accordance with the provisions of the ASME Code Section VIII, Div. 1.