background image

XSVI-9004-NAV

From the LD-AX-XSVI-AU1 harness to the aftermarket radio 
(a)  From the 12-pin harness:

• Connect the 

Red

 wire to the accessory wire.

• Connect the 

Orange

 wire to the illumination wire, if the aftermarket radio has

no illumination wire, tape off the 

Orange

 wire.

• Connect the 

Blue/White

 wire to the amp turn on wire (this wire must be

connected to hear sound from the factory amplifier).

Note: 

There is a 

Blue

 wire on the 40-pin harness to connect as well.

The following wires are for aftermarket multimedia/navigation radios that provide 
these wires (if not required, tape them off and disregard them):
• Connect the 

Light Green

 wire to the parking brake wire (if applicable).

• Connect the 

Green/Purple

 wire to the reverse wire (if applicable).

• The 

Blue/Pink

 wire will not be used, tape it off and disregard it.

Note: 

This wire will be on the 40-pin harness instead.

(b)  From the 40-pin harness:

• Connect the 

Black

 and 

Black/White

 wires to the ground wire.

• Connect the 

Yellow 

wire to the battery wire.

• Connect the 

Blue

 wire to the amp turn on wire (this wire must be connected

to hear sound from the factory amplifier). 

The following wire is for an aftermarket multimedia/navigation radio that 

provides this wire, if not required, tape it off and disregard it:
• Connect the 

Blue/Pink

 wire to the speed sense wire (V.S.S.), if applicable.

For non-BOSE systems:

• Disregard the

 White

 RCA, it will not be used in this application.

• Disregard the 

Gray

 RCA, it will not be used in this application.

• Connect the 

Green

 RCA to the left rear RCA output.

• Connect the 

Purple 

RCA to the right rear RCA output.

• Connect the 

White

 wire to the left front positive speaker output.

• Connect the 

White/Black

 wire to the left front negative speaker output.

• Connect the 

Gray 

wire to the right front positive speaker output.

• Connect the 

Gray/Black

 wire to the right front negative speaker output.

Tape off and disregard the following wires, they will not be used in 

this application:
• The 

Green

Green/Black

Purple

Purple/Black

 wires.

Connections to be made

Reviews: