NITO-01
I N S TA L L AT I O N I N S T R U C T I O N S
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
REV. 11/19/18 INSTNITO-01
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape • Wire cutter • Zip ties
OPTIONAL ACCESSORIES
(sold separately)
Steering Wheel Control Interface: ASWC-1
TABLE OF CONTENTS
Connections ............................................................2
Installation .............................................................3
Programming .........................................................3
Adjustments ...........................................................3
Extra Settings .........................................................4
Nissan
Maxima Amplifier Interface
2016-up
• Provides accessory power
(12-volt 10-amp)
• Provides NAV outputs (parking
brake, reverse, speed sense)
• Pre-wired ASWC-1 harness
(ASWC-1 sold separately)
• Retains the factory backup
camera
• Retains the audible parking
sensor warning
• Retains the factory AUX-IN jack
• Used in amplified applications
• Adjustable gain control for
overall volume
• High level speaker input
• Retains balance
• Micro-B USB updatable
• NITO-01 interface
• NITO-01 harness
• 16-pin harness with stripped leads
• AX-CAM6V 12-volt to 6-volt converter
for more detailed information about the product and up-to-date
vehicle specific applications
