From the 16-pin harness:
• Connect the
Red
wires to the ignition wire of the aftermarket radio.
• Connect the
Orange/White
wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire just tape off the
Orange/White
wire.
• Connect the
White
wire to the left front positive speaker output of the aftermarket radio.
• Connect the
White/Black
wire to the left front negative speaker output of the
aftermarket radio.
• Connect the
Gray
wire to the right front positive speaker output of the aftermarket radio.
• Connect the
Gray/Black
wire to the right front negative speaker output of the
aftermarket radio.
• Connect the
Green
wire to the radio’s left rear positive speaker output.
• Connect the
Green/Black
wire to the radio’s left rear negative speaker output.
• Connect the
Purple
wire to the radio’s right rear positive speaker output.
• Connect the
Purple/Black
wire to the radio’s right rear negative speaker output.
• Connect the
Blue/White
wire to the radio’s amp turn on wire.
• Connect the
Brown
wire to the mute wire of the aftermarket radio. If the aftermarket
radio does not have a Mute wire, tape up the
Brown
wire.
• Connect the
Light Green
wire to the parking brake wire of the aftermarket
navigation radio.
• Connect the
Blue/Pink
wire to the VSS or speed sense wire of the aftermarket
navigation radio.
• Connect the
Green/Purple
wire to the reverse wire of the aftermarket navigation radio.
• Plug the 16-pin harness into the GMOS-04.
3
Connections to be made
GMOS-04
