background image

CAUTION! 

 All accessories, switches, climate 

controls panels, and especially air bag indicator 

lights must be connected before cycling the 

ignition. Also, do not remove the factory radio 

with the key in the on position, or while the 

vehicle is running. 

AXDIS-GMLN11

I N S TA L L AT I O N I N S T R U C T I O N S

AxxessInterfaces.com 

© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION 

REV. 1/22/20 INSTAXDIS-GMLN11

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Wire cutter • Crimp tool • Solder gun • Tape

• Connectors (example: butt-connectors, bell 

caps, etc.) • Small flat-blade screwdriver

TABLE OF CONTENTS

Connections to be made ................................... 2-4
- For models 

without

 an amplifier .......................2

- For models 

with

 an analog amplifier ................3

- 3.5mm jack steering wheel control retention ..4
Installing the AXDIS-GMLN11 .................................4
Programming the AXDIS-GMLN11.................................... 5
Adjusting the AXDIS-GMLN11 .................................5
Steering wheel control settings .......................6-8
- L.E.D. feedback ....................................................6
- Changing radio type ...........................................6
- Remapping the steering wheel control buttons ... 7
- Dual assignment instructions (long button press) ...8
Troubleshooting .....................................................9

GM 

Data Interface with SWC

 

2006-2012

APPLICATIONS

•  Provides accessory power 

(12-volt 10-amp)

•  Retains R.A.P. (retained 

accessory power)

•  Provides NAV outputs (parking 

brake, reverse, speed sense)

•  Retains chimes
•  Retains audio controls on the 

steering wheel

•  Retains OnStar / OE Bluetooth
•  Adjustable OnStar level
•  Retains the factory AUX-IN jack
•  Can be used in non-amplified 

or amplified models

•  Retains balance and fade
•  Micro “B” USB updatable

• AXDIS-GMLN11 interface • AXDIS-GMLN11 harness
• 16-pin harness with stripped leads • 4-pin to 4-pin resistor pad harness
• Female 3.5mm connector with stripped leads

CHEVROLET

Cobalt 

2007-2010

HHR 

2006-2011

Malibu 

2008-2012

PONTIAC

G5 

2007-2009

G6 (5th digit of VIN must 

  be a J, K, or L) 

2009

PONTIAC 

(CONT)

G6 

2010

Solstice 

2006-2009

SATURN

Aura 

2007-2009

Sky 

2007-2009

Summary of Contents for AXDIS-GMLN11













Reviews: