Installation instructions for part AXDI-MB1
REV
. 1/21/2020 INST
AXDI-MB1
axxessinterfaces.com
•
metraonline.com
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Axxess Integrate
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Provides NAV outputs (parking brake, reverse, and V.S.S)
• Pre-wired AXSWC harness (AXSWC sold separately)
• Designed for non-amplified models, or when bypassing a factory amp
• Retains balance and fade
• Micro “B” USB updatable
INTERFACE FEATURES
• Cutting tool • Tape • Crimping tool
• Connectors (i.e. butt-connectors, bell caps, etc.)
TOOLS REQUIRED
AXDI-MB1
Mercedes Data Interface 2001-up
INTERFACE COMPONENTS
• AXDI-MB1 interface • LD-AX-XSVI-MB1 harness • LD-AX-XSVI-MB2 harness
LD-AX-XSVI-MB1 Harness:
C Class
2001-2004
CLK Class
2004
CLK500 2003
CLK55 AMG
2003
LD-AX-XSVI-MB2 Harness:
C Class
2005-2011
CLK Class
2005-2009
E Class
2010-up
G Class
2007-2012
GLK Class
2010-2012
R Class
2006-2011
SLK Class
2005-2011
Sprinter 2010-up
APPLICATIONS
Connections to be made ................................................... 2
Installing the AXDI-MB1 ................................................... 3
Initializing the AXDI-MB1 ................................................. 3
TABLE OF CONTENTS
