background image

XGPS150E

4

5

Mode switch

. The mode switch must be set for 

the device you want to use the XGPS150E with: 

Switch Position

For these devices:

Left (towards USB 

connector)

• Android, Windows & 

Blackberry devices, 

including tablets.

• Windows and Mac 

laptop computers.

Right (away from USB 

connector)

• iPod touch, iPad and 

iPhone

briefly  happens  when  the  XGPS150E  is  pairing 

with another device. A solid glow indicates that the 

XGPS150E has successfully paired and is com-

municating with another device.

GPS status indicator. 

The GPS indicator will 

flash while the XGPS150E is searching for satel-

lite signals. The light will change to a steady green 

when your location is successfully determined. 

NOTE:  when  paired  with  an  iPad,  iPod  touch  or 

iPhone the GPS status light will not illuminate until 

an app is actively requesting GPS information.
The charging port and a mode switch are located 

behind a small door on the side of the XGPS150E:

USB Connection

. The USB connector is used for 

charging the XGPS150E. You can charge the de-

vice from a USB port on a computer, in a car with 

the included cigarette lighter power adapter, or 

from a USB wall charger including the one which 

comes with the iPad, iPod touch and iPhone. 

USB port for charging

Mode switch

• Right for iPad/iPod/iPhone

• Left for all other devices

Summary of Contents for XGPS150E














Reviews: